Tag: refrigerator repair

How To Replace Your Washing Machine Belt?

Usually, the belt in your washing machine lies between the drum pulley and the motor. It is this part that allows the drum to go round during the washing process. Once in a while, if the drum ceases to turn as it is supposed to, it may indicate that the belt is worn out. Such indications may help you know whether you need to replace the washing machine belt or not. Sometimes, you might even notice the burning smell of rubber, which is usually an indication of a failing machine belt. If you also notice that once you start up the machine, the drum doesn’t rotate, then it means that you need to do some replacement. Once these issues start occurring, you will have to remove the old belt and replace it with another one. There are several places where you can buy the belt, be it in online stores or physical appliance stores. You, therefore, need to know how to put the washing machine belt in the right way, for the machine to resume its normal operations.

washing machine repair


Prepare The Machine

Before doing any other thing, you need to unplug the washing machine from the power supply. The washing machine uses electricity and trying to replace the belt when the power is still on is dangerous. You will notice that your washing machine needs to be laid on its side for you to access the belt assembly with ease. Laying the machine may be difficult if you are doing it alone. That is why you are advised to get someone to help you during this process. To avoid scratching the machine, ensure you put some old blankets or clothes on the floor before laying the machine.

Replace The Belt

Once you get the right belt for your machine, you need to proceed with the replacement. Your first task should be aligning the belt around the pulley. You want to ensure that the flat side doesn’t face inside.  See to it that the belt’s smooth side is facing out while the grooved side is facing inwards.  Arc the belt over the drum pulley to allow it to fit perfectly into the grooves. As you do this, see to it that the belt hangs flexibly onto the drum pulley. After this step, you want to secure the belt to the pulley with something like a zip tie. The zip tie is usually great because it allows you to stretch a tight belt. Proceed by pulling the end of the belt tightly until it stretches around the motor pulley and fits well into the groove. Slowly spin the drum in a clockwise manner to turn the pulley. The aim is to ensure that the belt aligns on the pulley. If it aligns, cut the zip tie because leaving in inside the machine may cause the belt to slip, which is dangerous.

It is good to know how to replace the belt of your washing machine if you own one. This knowledge is essential because your washing machine may break down once in a while. Use the knowledge above to replace your belt.

Broward County Areas That We Service:

Tamarac, Parkland, Margate, Davie, Plantation, Lauderhill, Cooper City, Lauderdale Lakes, Sunrise, Hallandale, Weston, North Lauderdale, Hollywood FL, Coral Springs, Miramar,Coconut Creek, Deerfield Beach, Lighthouse Point, Pembroke Pines, Pompano Beach, Oakland Park, Dania

How To Replace Your Washing Machine Belt? syndicated from Appliance Repair Fort Lauderdale

Signs That You Are Using Excess Detergent In The Washing Machine

Several washer problems are caused by using too much laundry detergent in the washing machine. Unfortunately, only a few people are aware of this. People tend to assume that the more the soap, the cleaner the clothes will be. You are supposed to put the required amounts of detergent in the washing machine to prevent it from breaking down. If you exceed the maximum amount, it could cause so much foaming that will cause the rubber seals on the door to bust and flood the room you put it. The points that follow show you what happens whenever you put excess detergent in the washing machine.

Beware of the SUD alert or the ND error code that can set off if you put in too much soap in the washing machine. It may also show that the pump is damaged or there is an extra heavy load or excessive suds. The machine and the motor may have to strain if the suds are increased; hence, it may shut off, and therefore, it will not drain. There may be a solution for the latter statement, that may work but only during rare circumstances: clearing the suds and the code by running another cycle but with no soap. The suds may have so much lather. The foam travels up the hose and may end up damaging the switch; hence, you will require services from a professional who deals with washing machines. Stick to the rule and use the right amounts of detergent to avoid such expenditures.

The washer may start smelling funny, and this is because the washing detergent residue may cling with mildew, bacteria, and foul odors. Unfortunately, whenever you put your clothes in the machine, and you fail to remove them after a wash, they automatically end up having pungent odors. Hence one should use only a tablespoon of laundry soap or two if your clothes are entirely soiled to prevent the buildup of foam inside the washing machine. Another alternative may be using Affresh tablets to clean the washer once every month for better results.

If you are an owner of a front-loading washing machine, and you put excess soap in the washer per load, it will accumulate inside the boot. Humidity and soap buildup is a breeding ground for mildew and mold; hence, your clothes will be stained now and then. However, if you happen to smell mildew or see spots on your clothes, you should look at the door boot. The door boot may require to be cleaned thoroughly or replaced if there is the presence of mildew.

The points above have outlined various signs on the effects of using a lot of detergent in a washing machine. It is therefore advised to use the right amount, to avoid these effects. Based on the type of washing machine you are using: traditional or high-efficiency washers ensure that you use the expected detergent and follow the instructions to the latter as well as use the right amounts of soap in every wash.


Broward County Areas That We Service:

Lauderdale Lakes, North Lauderdale, Coral Springs, Miramar, Margate, Pembroke Pines, Dania, Tamarac, Parkland, Coconut Creek, Cooper City, Deerfield Beach, Lighthouse Point, Pompano Beach, Oakland Park, Davie, Plantation, Sunrise, Lauderhill, Hollywood FL, Weston

Signs That You Are Using Excess Detergent In The Washing Machine syndicated from Appliance Repair Fort Lauderdale

Here’s What To Do If Your Oven Won’t Start

kitchen oven

Getting up in the morning to use your oven or using it to make dinner is something everyone does. This is why it can be stressful when it doesn’t start. So, what to do if your oven won’t start? There are a few things you can try.

Check these things when your oven not working:



How To Fix Oven Fuses

There are ovens that have internal fuses and if those fuses blow, then your oven won’t start. The good news is replacing a fuse is easy, and knowing whether or not you have a blown one is easy. An oven will usually have an indicator that tells you that a fuse has blown or something is wrong with it. Before you replace a fuse, make sure you inspect the oven because another issue might be the cause of the oven not starting. Do make sure you turn the oven’s power source off before replacing the fuse. After replacing it, turn the source back on and see if the oven starts. If oven doesn’t start, then check to make sure you replaced the right fuse.  

The Spark Electrode

kitchen oven applianceIf you have a gas oven, then the spark electrode might be the reason why your oven won’t start. This component is what ignites the gas in your oven, and if it is damaged, then it can become faulty. Only the tip has to be damaged or the casing in order to cause the oven not to start. Don’t panic if the spark electrode is the cause, as this is a quick and easy fix. All you have to do is buy a new spark electrode and replace the old one with it. This should fix the problem, but do compare a few electrodes before deciding which one to purchase. You want to choose a high quality electrode, otherwise you run the risk of it failing you in the near future.  

Oven Broiler Not Working

At the top of your oven is where you’ll find a broil element. This is the part that produces high heat for broiling. If this element has malfunctioned or isn’t working, then your oven won’t work properly, including not turning on. Take a look at the element to ensure it looks normal. If it has visible damage, then try replacing it to see if this fixes the issue. Make sure the appliance is disconnected from the power source before you replace the broil element. If you’re not sure how to replace it, then contact an appliance repair company and they’ll do it for you.  

Electric Oven Sensor Element

Modern electric ovens sometimes come equipped with a sensor. Check the sensor to see if something is wrong with it. If there is, replacing or repairing it should fix the issue. However, hire an expert to inspect the sensor if you’re not sure how to do it. If your oven won’t start, then make sure you try the above. If none of them work, then hire an appliance repair professional or you can purchase a brand new oven. Remember, not all problems with your oven can be fixed, which is why replacing it might be the only option you have.


Broward County Areas That We Service:


Parkland, Coconut Creek, Deerfield Beach, Lighthouse Point, Pompano Beach, Oakland Park, Davie, Plantation, Sunrise, Lauderhill, Hollywood FL, Weston, Cooper City, Lauderdale Lakes, North Lauderdale, Coral Springs, Miramar, Margate, Pembroke Pines, Dania, Tamarac

Here’s What To Do If Your Oven Won’t Start syndicated from Appliance Repair Fort Lauderdale

Stove Won’t Turn On

If your burner or stove won’t turn on, it can upset your daily routine and can be a source of huge frustration. When faced with the question “What do I do when my stove won’t turn on?” We have come up with a troubleshooting guide that will help you identify the problem with your machine. If these tips don’t help in getting answers for your question “Why my gas stove won’t turn on?” it is best to get help from a professional.

Here are some of the possible causes for stove not turning on:


Disconnected or Loose Plug
Circuit Breaker has Tripped
Burner Element is Disconnected
Faulty Burner
Knob is Broken
Internal Fuse of Machine is Blown

Stove Not Clicking Or Lighting – Disconnected or Loose Plug

If your stove top won’t turn on, it may be because the plug is disconnected or loose. Some of the reasons why the cord may disconnect abruptly include machine vibration, aging outlet, and change in temperature. To test the condition of the plug, move the stove carefully to allow access to the plug. Remove the plug from the socket and reconnect it firmly. If your plug wiggles out from the socket, it means the outlet must be replaced.

Circuit Breaker has Tripped

Your electric stove won’t turn on if the circuit breaker has tripped. Most houses are equipped with a circuit breaker that regulates the flow of electricity to the socket. If for some reason the circuit that your electric stove is connected to has tripped, you must reset it to start the machine. An electric stove that is malfunctioning is likely to trip the circuit breaker once again. Check your circuit breaker box or fuse and make sure the section that is connected to your electric stove is “On”. When you are unsure of its position, trip the circuit breaker and turn it back on once again.

How To Fix A Burner On Electric Stove – Disconnected

Regular use of the machine can disconnect the element from the machine’s terminal socket. If the element is loose, your electric stove top won’t turn on. To troubleshoot this problem, unplug the machine’s burner element and check for signs of damage or rust. If there are no signs of damage, fix the burner back into the socket. If the burner wiggles, it means the socket is damaged and must be replaced. You can replace a functional burner with the faulty burner to check the condition of the terminal socket. If the burner does not heat after you have you have
swapped it with a functional burner, it means that socket is damaged and it must be replaced.

Burner On Stove Won’t Turn On

When your stove doesn’t turn on, it could be due to a faulty or damaged burner. When the burner is faulty, it will eventually stop working and prevent the machine from heating. To check the condition of the burner, swap it with a working burner. Make sure the burner you swap is of the same size. If the problem is solved, it means the burner is faulty and it must be replaced. If the problem persists, it means that socket is damaged and it must be replaced. Before swapping the burner, check for signs of damage on the burner. For instance, if the burner is damaged, it will not heat properly or will not connect to the socket properly. Such burners must be replaced immediately.

How To Fix Broken Knob In Electric Stove

Another reason for electric stove not turning on is the broken knob. When the knob is broken, the stove does not get the signal that is supposed to start it. You should inspect the knob for signs of damage and replace it, if necessary. Some of the possible problems with the knob include being in a condition where it does not turn easy, it’s wobbly, or gets stuck.

To test the condition of
the knob, you must remove the knob and use pliers to activate the underlying
switch. You should replace the knob if this does not work. However, if the
inner wiring that connects the control panel to the knob is damaged, the
problem may be more extensive. In such situations, replacing the knob will not
help. You will have to get professional help to troubleshoot this problem.

Internal Fuse of Machine is Blown

Your electric stove burner won’t turn on if the internal fuse is blown. This fuse is separate from the circuit breaker you have in your home. Even if one fuse is blown, the machine will not turn on. To troubleshoot this problem, use the owner’s manual to locate the machine’s fuse box. Check the condition of each fuse and replace the fuse that is blown. If there is no problem with the fuse, inspect the wiring and make sure all the wires are connected properly to the fuse.

A Word of Caution

Before attempting to find answers for your question “Why my electric stove won’t turn on?” you must disconnect the power supply to the machine. Also, if the problem persists even after you have followed all the tips given in the article, it is best to get help from a qualified technician.

Broward County Areas That We Service:

Coconut Creek, Deerfield Beach, Lighthouse Point, Oakland Park, Margate, Davie, Plantation, Lauderhill, Cooper City, Lauderdale Lakes, Sunrise, Hallandale, Weston, North Lauderdale, Hollywood FL, Coral Springs, Miramar, Pembroke Pines, Pompano Beach, Dania, Tamarac, Parkland

Stove Won’t Turn On syndicated from Appliance Repair Fort Lauderdale

How to Fix A Dishwasher That Doesn’t Dry

Having a dishwasher can make your life easier, especially if you have to clean hundreds of dirty dishes every day. Cleaning these dishes without the help of a machine can be a pain. When you use the dishwasher, you can clean all your dishes without getting your hands dirty. However, life can be frustrating if your dishwasher won’t run. When your dishwasher won’t work, you will have to clean your dishes manually, which can upset your daily routine. If you plan to replace a dishwasher that does not work, you may have to spend hundreds of dollars on replacement. If you live in Miami, you could contact a dishwasher repair Miami company to repair or service your appliance. Companies that offer dishwasher service repair in Miami, will send a trained technician to your place to troubleshoot the problem with your machine.

One of the problems you are likely to face with your machine, is heat dry not working on dishwasher. When your dishwasher doesn’t dry, you will have wet dishes that you may be unable to use. The problem of dishwasher not heating or drying properly is not isolated to one brand or company. If you check out review websites, you will find many people complaining about Bosch dishwasher drying issues, Whirlpool dishwasher gold series not drying, or Frigidaire dishwasher drying issues. If your Whirlpool dishwasher does not dry or you have a Bosch dishwasher not drying properly, you should get help from commercial dishwasher repair provider. Their technician will find out why dishwasher heated dry is not working and repair or replace the problem part. Some possible reasons why you are facing this problem include:

Heating Element

A problem with your washer’s heating element can cause the problem of dishes not drying. To check its condition, disconnect the power supply to the machine. Then check its continuity using the multi-meter. To check the terminals of the heating elements, you must remove the lower panel of the machine.

repair man fixing dishwasher


This is a safety device that prevents the machine from overheating. If the thermostat does not work properly, it will shut off the machine before the cycle is complete. This will prevent the machine from drying the dishes. You must remove the bottom of your washer to check the condition of thermostat.

Rinse Aid Dispenser

dishwasher being fixed

This is another part that can prevent your dishes from fully drying. When the rinse aid does not work properly, the dishes will not shed water and won’t dry the dishes properly. Also, make sure the dispenser is not empty, as it can affect the performance of your machine. If there is rinse aid in the dispenser, make sure the cap of the dispenser is fitted properly.

For more technical issues consult onsite appliance repair professionals for help.

Broward County Areas That We Service:

Weston, Oakland Park, Dania, Parkland, Tamarac, Margate, Hollywood FL, Pompano Beach, Deerfield Beach, Miramar, Plantation, Pembroke Pines, Lighthouse Point, North Lauderdale, Davie, Lauderdale Lakes, Coral SpringsLauderhill, Hallandale, Cooper City, Sunrise, Coconut Creek
How to Fix A Dishwasher That Doesn’t Dry syndicated from Appliance Repair Fort Lauderdale